Heating mat with thermostat.
• The heating mat has a PID thermostat that regulates and maintains the temperature.
• High-quality, waterproof PVC material ensures fast and even heat distribution.
• Energy-efficient
• Easy to use
• Adhesive backing included for attaching the mat to glass
The thermostat is factory-set to +35 degrees. Adjustment range: +20-50
Available
4w 18x10 cm
8w 20x15 cm
16w 30x20 cm
24w 45x20 cm
Thermostat instructions
Plug it into a power outlet.
Power on: Press and hold the SET button for 3 seconds.
Power off: Press and hold the SET button for 3 seconds; the digital display will show "OF".
Press the ▲ and ▼ buttons simultaneously to switch between Celsius (°C) and Fahrenheit (°F).
The factory-set temperature is 35°C. The user can adjust it as desired.
The system has a memory function and automatically saves the current temperature setting after adjustment.
Press the ▲ button and the SET button simultaneously to access the temperature setting. The last digit of the temperature value will flash, indicating that you are in setting mode.
Use the ▲/▼ buttons to adjust the temperature. Press SET again to exit setting mode, or wait 8 seconds for it to exit automatically.
Temperature adjustments will not take effect if the set value is outside the controller's permitted range (20–50°C).
If the ambient temperature is 3°C below the set value, the temperature value will flash rapidly as a low-temperature warning. The heating mat will warm up to the set value (there is no need to press any buttons).
If the temperature sensor is short-circuited or disconnected, the controller will enter fault mode (all functions disabled) and the display will show "Er". Normal operation will resume once the fault has been resolved.
The display shows "LL" for temperatures below 0°C and "HH" for temperatures above 60°C.